Compressed Air Pipework Installation Projects
Our compressed air projects range from school workshops to airport and mine site installations, each delivered by our own team.
Adaptive Air Compressors designs, supplies and installs compressed air, breathing air and workshop fluid systems across NSW and interstate, from school workshops to mine sites and airport facilities. Each project below was planned, installed, pressure tested and commissioned by our own team.
For the services behind these jobs, see compressed air pipework installation, complete compressed air packages and breathing air systems.
Western Sydney Airport, Luddenham NSW
Client: Fredon | Facility: Airservices Australia ARFF station | Duration: 12 months | Status: Completed
Adaptive Air Compressors delivered the complete compressed air and breathing air systems for the new Airservices Australia Aviation Rescue Fire Fighting (ARFF) facility at Western Sydney International Airport, working under subcontract to Fredon.
- Two oil-free air compressors with twin vertical air receivers, refrigerated dryer and filtration in a dedicated plant room
- Two high-pressure breathing air compressors, engineered with Bauer Kompressoren and craned into position, for firefighter breathing air
- Stainless steel press-fit compressed air pipework run at high level through the vehicle bays and workshops
- Outlet points with isolation valves, filter regulators and retractable hose reels
- Commissioning, QA and witness testing to the project specification
Woolworths Sydney Chilled & Fresh Distribution Centre, Eastern Creek NSW
Client: New Edge Group | Builder: BESIX Watpac | Duration: 6 months | Status: Completed
Adaptive Air Compressors delivered the compressed air pipework package for the new Woolworths Sydney Chilled & Fresh Distribution Centre at Eastern Creek, working for New Edge Group on the BESIX Watpac site.
- Over 1.5 km of Type B copper press-fit compressed air pipework, ranging from 15 mm to 65 mm
- Compressed air supply to the MHE Workshop and Truck Maintenance areas
- Pipework to the Automation Line, plus additional supply to the automation areas, automation workshop and office spaces
- Pipework installation and commissioning of the compressed air system
- Delivered on a live tier-one construction site, staged across multiple project phases to suit the builder’s program
Thiess, Mt Arthur NSW
Client: Thiess | Site: Mt Arthur mine, Hunter Valley | Duration: 3 weeks | Status: Completed
Service pipework for a new heavy vehicle workshop on an operating mine site, installed at height around a 20 tonne overhead crane.
- Bank of stainless steel press-fit service lines run at high level along the workshop frame
- Blue aluminium compressed air main with drops to each bay
- Drops fitted with isolation valves, filter-regulator-lubricators and hose reels
- All work completed from boom lifts and scissor lifts to mine site safety requirements
Rix’s Creek Mine, Singleton NSW
Site: Rix’s Creek mine workshop | Status: Completed
An upgrade to the fluid dispensing and compressed air services in a mining workshop, replacing older lines and reels with a stainless steel system.
- Coolant storage tanks piped to air-operated diaphragm pump skids
- Stainless steel press-fit pipework from the tanks to the service bays
- New hose reel stations with control panels in the lube bay
- Compressed air drops to the service bay columns
- Pressure testing before handover
SEW-Eurodrive, Tomago NSW
Client: SEW-Eurodrive | Pipework: AIRnet aluminium | Status: Completed
A compressed air ring main for a new industrial facility at Tomago, installed at high level around the factory floor.
- AIRnet aluminium compressed air ring main around the perimeter of the factory
- Flanged isolation valves so sections of the ring main can be shut off independently
- Drop leg assemblies with ball valves and outlet blocks, prefabricated in our workshop
- Installed from elevated work platforms and coordinated with the overhead crane rails
Edmund Rice College, West Wollongong NSW
Client: Edmund Rice College | Pipework: Aluminium | Status: Completed
Compressed air for the new technology workshops at a secondary school, from the compressor through to the outlets at each bench and machine.
- Adaptive Air EPM7.5 tank-mounted rotary screw compressor package with refrigerated dryer
- Blue aluminium ring main run on cable tray at ceiling level
- Coiled hose drops over the work areas
- Wall outlets at bench height and connections to workshop machinery
TAFE Queensland Bohle Campus, Townsville QLD
Client: VAE Group | Duration: 1 week | Status: Completed
Two independent compressed air systems for the new Advanced Manufacturing, Hydrogen and Renewable Energy Building. Our NSW-based team travelled to Townsville to supply, install, pressure test and commission the full fit-out in one week.
- Two Chicago Pneumatic CPM 7.5 screw compressor packages
- Stainless steel press-fit pipework systems
- Full pressure testing and commissioning
Lowbake Australia, Newcastle NSW
Client: Capital Smart | Duration: 2 weeks | Status: Completed
A complete compressed air system for an automotive body repair facility, delivered alongside Lowbake Australia.
- 50mm ring main and 25mm droppers in AIRnet aluminium pipework
- Sollant SLT 22kW variable speed rotary screw compressor, air dryer and 5-stage filtration package
- Air distribution across multiple bays, including connection to panel repair equipment
- Two Walker Filtration breathing air filtration systems with CEJN eSafe fittings
Have a project coming up and need expert advice? Contact Dylan to find out how Adaptive Air Compressors can assist with your project — from system design and installation through to ongoing servicing and proven compressed air solutions.
Dylan Clapp
0456112234
dylan@adaptiveair.com.au
Do you have Compressed Air Pipework Installation Projects that needs quoting?
Complete the contact form below and our team will contact you to discuss your requirements and provide a detailed quotation.
More compressed air projects
Our project division has its own website. See full case studies of these compressed air projects, and the pipework systems we install, at compressedairprojects.com.au. For the pipework materials we use, see compressed air pipework installation.
What our compressed air projects include
Most compressed air projects follow the same steps: design from the air demand, supply of the compressors and air treatment, pipework installation, then pressure testing and commissioning. We deliver compressed air projects for site owners directly and as a subcontractor to builders and mechanical services contractors.
Planning compressed air projects early in a build saves money, because pipe routes and plant room space can be agreed before other services go in. Our compressed air projects cover aviation, logistics, mining, manufacturing, education and automotive sites across NSW and interstate.